BulletShield™ BT1000

UL 752 Level 1 — Protection Against Handguns Up to 9mm Supplied & Installed by Virtual Bridge

Meta Title: BulletShield BT1000 | UL 752 Level 1 Bullet Resistant Rolling Door — Virtual Bridge Middle East

Meta Description: The BulletShield BT1000 is a UL 752 Level 1 certified bullet resistant rolling door assembly protecting against all handguns up to 9mm. Motorised, up to 23 feet wide and 18 feet high. Supplied and installed by Virtual Bridge across the Middle East and Gulf.

URL Slug: /trading/mckeon-door-systems/security-blast-protection/bulletshield-bt1000

Breadcrumb: Home > Trading Division > McKeon Door Systems > Security & Blast Protection > BulletShield Series > BT1000

Primary SEO Keywords: UL 752 Level 1 door Saudi Arabia | 9mm resistant rolling door UAE | bullet resistant door GCC | ballistic door Middle East

Hero Section

Hero Headline

UL 752 Level 1 Certified. The Proven Response to the Most Commonly Encountered Ballistic Threat.

Hero Sub-Headline

The BulletShield BT1000 provides independently certified and UL 752 Listed ballistic protection against all caliber handguns up to and including 9mm — the most prevalent firearm caliber in commercial and institutional security incidents. Motorised, large-opening capable, and available in any powder coat finish. Supplied and installed by Virtual Bridge across the Middle East and Gulf.

Hero CTAs

• Request a BT1000 Specification →
• Download UL 752 Level 1 Certification →

Trust Bar

▸  UL 752 Level 1 — Independently Certified

▸  9mm Full Metal Case — Tested & Listed

▸  Motorised — Up to 23 ft Wide, 18 ft High

Section 1: Certification & Performance

Section Headline

Independently Listed. Documentably Proven. Correctly Specified.

The BulletShield BT1000 is independently tested, certified, and listed under UL 752 Level 1. Under the UL 752 standard, Level 1 requires the assembly to withstand a minimum of three shots from a 9mm Full Metal Case handgun round, fired from a defined distance, without bullet penetration to the witness panel placed on the protected side of the assembly.

The 9mm caliber is the most commonly encountered firearm round in commercial and institutional security incidents globally — and across the GCC and wider Middle East region. It is the standard caliber for law enforcement sidearms, is widely available, and is the round most frequently associated with opportunistic, commercially motivated, and targeted attacks on commercial and institutional facilities.

The BT1000 provides the documented, certified response to this specific threat: a large-opening rolling door assembly that has been independently proven to stop 9mm rounds under controlled test conditions, with a UL listing that is traceable, public, and available for inclusion in any security specification.

Section 2: Where the BT1000 Is Specified

Section Headline

The Right Level of Certified Protection for Commercial and Institutional Security Requirements.

The BT1000 is the specification choice for facilities where the documented threat assessment identifies 9mm handgun caliber as the primary ballistic risk, and where a large opening must carry a credible, independently certified ballistic resistance rating.

• Bank Branches & Financial Retail — Teller areas, cash office entrances, and cash-in-transit vehicle bays where the threat profile is consistent with armed robbery of commercially operated premises. The BT1000 provides UL 752 Level 1 certified protection across the large openings that standard ballistic-resistant door sets cannot accommodate.
• Retail Environments — High-Value Merchandise — Gold and jewellery retailers, luxury goods stores, electronics outlets, and any retail environment where the combination of high-value merchandise and public access creates a documented robbery risk. The BT1000 secures the back-of-house, storage, and loading access openings that are frequently targeted in after-hours and smash-and-grab attacks.
• Reception Areas & Lobby Screening Points — Commercial office buildings, government administrative facilities, and institutional reception environments where a ballistic-resistant separation between public and secure zones is a defined security requirement at large openings.
• Pharmacies & Controlled Substance Dispensaries — Hospital pharmacy dispensaries, retail pharmacies, and controlled substance storage facilities where armed theft of pharmaceuticals represents a documented risk. The BT1000 provides Level 1 certified protection for the storage and access openings that standard pharmacy security products leave exposed.
• Hotels & Commercial Hospitality — Cash handling facilities, security control rooms, and back-of-house service entrances in hotels and commercial hospitality venues where the combination of cash, valuables, and 24-hour operation creates a documented ballistic risk.
• Data Centers & Secure Operations — Access openings to operations centers, server rooms, and secure processing environments where protecting personnel and infrastructure from an externally initiated ballistic threat is a defined security design requirement.

Section 3: BT1000 Frequently Asked Questions

[ CMS NOTE: Accordion — collapsed by default, expanding on click. ]

Is the BT1000 sufficient for a government facility?

That depends entirely on the facility’s documented threat assessment. The BT1000 is appropriate for government administrative buildings where the threat profile is consistent with 9mm handgun caliber — which is the case for many general government administration and public-facing government service facilities. For defense installations, intelligence facilities, or government premises with a documented high-caliber or rifle threat, the HG3000 or RF8000 would be the appropriate specification. Virtual Bridge recommends all model selections are based on a qualified security consultant’s threat assessment.

Can the BT1000 stop rounds larger than 9mm?

The BT1000 is certified to UL 752 Level 1, which tests specifically for 9mm Full Metal Case rounds. Its performance against calibers beyond 9mm has not been independently certified under UL 752. For facilities where the threat assessment identifies calibers above 9mm — including .357 Magnum, .44 Magnum, or rifle rounds — the HG3000 (Level 3) or RF8000 (Level 8) should be specified. Never assume performance beyond the certified level.

Does the BT1000 also provide forced entry resistance?

The BT1000 is certified for ballistic resistance under UL 752. It has not been independently certified for forced entry resistance under ASTM F3038. If both ballistic protection and forced entry resistance are required for the same opening, contact Virtual Bridge to discuss the available options and any combined protection configurations that may apply to your project.

What finish options are available for the BT1000?

The standard finish is Sterling Gray. Powder coat in any specified colour is available on request — specify at time of order. Finish selection does not affect the ballistic performance of the assembly.

BT1000 Page CTA

CTA Headline

Your Facility Has a 9mm Handgun Risk. The BT1000 Has the Certification to Address It.

CTA Buttons

• Request a BT1000 Specification Consultation →
• Download UL 752 Level 1 Documentation →
• Compare All BulletShield Models →