Every building has openings. And every opening — regardless of size, location, or intended use — represents a potential point of forced entry. The EntryShield FE6000 transforms large openings from vulnerabilities into verified barriers. Independently certified to ASTM F3038 — 60 minutes of sustained forced entry resistance. The largest overhead coiling door to successfully complete the test.
No attacker will maintain a 60-minute assault on a single opening. The extended duration creates noise, visibility, and response time — making successful forced entry economically and operationally unviable in any realistic scenario.
The ASTM F3038 protocol requires a methodical forced entry attempt by trained testers using recognised breach tools and techniques for the full 60-minute duration. The FE6000 withstood every part of that protocol. This is tested performance, not theoretical resistance.
Intertek listing documentation is publicly traceable and available for inclusion in security specifications, authority submissions, project compliance files, and insurance records. A manufacturer claim cannot substitute for this.
The FE6000 is relevant across four broad categories of buildings where forced entry protection is a defined security requirement at large openings.
Select a view. All figures are supported by Intertek certification and listing documentation available for project specification and authority submissions.
| Parameter | Specification |
|---|---|
| Product Name | EntryShield™ Model FE6000 |
| Certification Standard | ASTM F3038 — Standard Test Method for Timed Evaluation of Forced-Entry-Resistant Systems |
| Testing Authority | Intertek (independently tested, certified, and listed) |
| Certified Resistance Duration | 60 minutes — full protocol without allowing passage |
| Industry Distinction | Largest overhead coiling door to successfully complete ASTM F3038 |
| Test Protocol | Sustained methodical forced entry attempt by trained testers using recognised breach tools and techniques for full 60-minute duration |
| Compliance Documentation | Full ASTM F3038 certification and Intertek listing — available for authority and specification submissions |
| Parameter | Specification |
|---|---|
| Maximum Width | 30 feet (9,144mm) |
| Maximum Height | 22 feet (6,706mm) |
| Custom Sizing | Available within maximum dimensions — consult Virtual Bridge for project-specific configuration |
| Thermal Option | Available — R Value up to 8.0 |
| Thermal Applications | Climate-controlled warehouses, cold storage, pharmaceutical plants, industrial process buildings |
| Large Opening Classification | The largest certified forced entry overhead coiling door available — no other product in this category matches this size envelope |
| Parameter | Specification |
|---|---|
| Operation | Power motor driven — overhead coiling |
| Emergency Close — Manual | Manual push-button operation from within the protected area |
| Emergency Close — Automatic | Automatic closing via remote actuating device |
| System Integration | Integrates with alarm panels, access control platforms, building management systems (BMS), and centralised security management |
| Integration Configuration | Project-specific — Virtual Bridge installation team assesses existing security infrastructure and configures accordingly |
| Daily Use | Designed for both daily operational use and rapid emergency response |
| Parameter | Specification |
|---|---|
| Standard Finish | Sterling Gray |
| Optional Finish | Powder coat in any specified colour — no effect on forced entry resistance performance |
| Certification Documentation | ASTM F3038 certification report & Intertek listing |
| Technical Documentation | Product data sheet, assembly specification, installation drawings |
| Project Documentation | Structural surround requirements, motor configuration spec, access control integration spec |
| Handover Documentation | O&M manual, compliance checklist for authority submission |
Standard ballistic-resistant glass and door sets address pedestrian-scale openings. What they cannot address is the vehicle bay, the loading dock, the aircraft hangar, or the large operational opening that must be controlled but cannot be protected by a standard-sized security door.
Standard forced entry resistant products — reinforced doors, bullet-resistant glass, security shutters — are engineered for pedestrian-scale openings of 3 to 10 feet. The vulnerability they leave unaddressed is the large-span opening: the loading bay at 24 feet, the service entrance at 18 feet, the gymnasium access at 30 feet.
These large openings are frequently the deliberate target in organised crime and planned forced entry because they are large enough for vehicles and groups, and because standard security products provide no certified protection at that scale.
The FE6000 was engineered specifically to close this gap. At widths up to 30 feet and heights up to 22 feet, it delivers certified ASTM F3038 forced entry resistance across the large-span openings that no other certified product in its category can cover.
For facilities where energy efficiency or temperature control is a secondary requirement alongside forced entry protection, the FE6000 is available with optional thermal insulation — a practical dual-purpose specification for:
Security doors that cannot close quickly in an emergency create a different kind of risk. The FE6000 is designed for both daily operational use and rapid emergency response — functioning as an active security response tool, not just a passive physical barrier.
The FE6000 is relevant across every major sector in Virtual Bridge's portfolio — wherever a large opening must carry a certified forced entry resistance rating and wherever the 60-minute protection standard is a defined security requirement.
Virtual Bridge manages the complete lifecycle of the EntryShield FE6000 across the Middle East, Gulf, and Africa — from specification and compliance documentation through supply, professional installation, system integration, and ongoing maintenance support.
Standard security shutters and roller grilles provide a physical deterrent but carry no certified forced entry resistance rating. They have not been independently tested to a timed forced entry protocol and cannot provide the compliance documentation that security specifications require.
| Performance Attribute | EntryShield™ FE6000 | Standard Security Shutter |
|---|---|---|
| ASTM F3038 Certification | ✔ Certified — 60 minutes | ✘ Not tested or certified |
| Independent Third-Party Test | ✔ Intertek — listed | ✘ Manufacturer self-assessment only |
| Timed 60-Minute Resistance | ✔ Verified — documented result | ✘ No timed protocol — unknown resistance |
| Compliance Documentation | ✔ Full — for authority submissions | ✘ Not available for security specifications |
| Max Width Coverage | ✔ Up to 30 ft (9,144mm) | ✘ No certified large-span option |
| Emergency Auto-Close Integration | ✔ Alarm, access control, and BMS | ✘ Not standard |
| Optional Thermal Insulation | ✔ R Value up to 8.0 | ✘ Not available |
| Motorised Operation | ✔ Standard | ✔ Standard |
| Physical Deterrent | ✔ Certified 60-minute resistance | ~ Uncertified deterrent only |
Contact the Virtual Bridge Technical Team to discuss your forced entry resistant door requirements, receive project-specific specification support, and obtain full ASTM F3038 certification and Intertek listing documentation for your submissions.
